5/8" Diameter PH Series Stainless Stub (1.5XD-2XD): 1-1/4" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc) and Titanium (6AL4V):
5/8" Diameter x 3/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Stainless
5/8" Diameter x 1-1/4" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Stainless
| Axial DOC |
1-1/4" and Below |
| Radial DOC |
.055" |
| SFM |
300 |
| RPM |
1,834 |
| CLPT |
.010" |
| IPM |
91.7 |
| Metal Removal Rate |
6.30 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
