Thread Mills (Indexable)

Thread Mills (Indexable)
- Brand
  - Carmex
- Series
  - Mill Thread
- Insert Size
  - 12mm
  - 12mm (NPT Only)
  - 14mm
  - 21mm
  - 30mm
  - 40mm
- Internal or External
  - Both
  - External
  - Internal
- TPI
  - 0.5ISO
  - 0.75ISO
  - 1.0ISO
  - 1.25ISO
  - 1.5ISO
  - 1.75ISO
  - 10ABUT
  - 10ACME
  - 10APIRD
  - 10UN
  - 10W
  - 11.5NPS
  - 11.5NPSF
  - 11.5NPSM
  - 11.5NPT
  - 11.5NPTF
  - 11BSPT
  - 11UN
  - 11W
  - 12ABUT
  - 12ACME
  - 12UN
  - 12UNJ
  - 12W
  - 13UN
  - 14BSPT
  - 14NPS
  - 14NPSF
  - 14NPSM
  - 14NPT
  - 14NPTF
  - 14UN
  - 14UNJ
  - 14W
  - 15ISO
  - 16ABUT
  - 16PG
  - 16UN
  - 16UNJ
  - 16W
  - 18NPS
  - 18NPSF
  - 18NPSM
  - 18NPT
  - 18NPTF
  - 18PG
  - 18UN
  - 18UNJ
  - 18W
  - 19BSPT
  - 19W
  - 2.0ISO
  - 2.5ISO
  - 20UN
  - 20UNJ
  - 20W
  - 24UN
  - 24UNJ
  - 24W
  - 25ISO
  - 27UN
  - 28UN
  - 3.0ISO
  - 3.5ACME
  - 3.5ISO
  - 32UN
  - 3ACME
  - 4.0ISO
  - 4.5ISO
  - 4.5UN
  - 4ABUT
  - 4ACME
  - 4UN
  - 5.0ISO
  - 5.5ISO
  - 5ACME
  - 5UN
  - 6.0ISO
  - 6ACME
  - 6UN
  - 7UN
  - 8ABUT
  - 8ACME
  - 8NPS
  - 8NPSF
  - 8NPSM
  - 8NPT
  - 8NPTF
  - 8UN
  - 8W
  - 9UN
  - 9UNJ
  - BSPT 11
  - BSPT 14
  - BSPT 18
  - BSPT 19
  - ISO 1.5
  - ISO 1.75
  - ISO 5.0
  - NPS 11.5
  - NPS 14
  - NPS 18
  - NPS 8
  - NPSF 11.5
  - NPSF 14
  - NPSF 18
  - NPSF 8
  - NPT 11.5
  - NPT 14
  - NPT 18
  - NPT 8
  - NPTF 11.5
  - NPTF 14
  - NPTF 18
  - NPTF 8
  - SO
  - WHIT 11
  - WHIT 14
  - WHIT 16
  - WHIT 19
  - WHIT 20
  - WHIT 24
  - WHIT 8
- Grade
  - MT7
- Min Bore
  - .370"
  - .390"
  - .500"
  - .540"
  - .570"
  - .670"
  - .790"
  - .940"
  - 1.140"
  - 1.180"
  - 1.240"
  - 1.500"
  - 1.730"
  - 1.970"
  - 2.480"
  - 3.150"
  - 3.940"
- Reach
  - .510"
  - .700"
  - .770"
  - 1"
  - 1.180"
  - 1.540"
  - 1.850"
  - 1.970"
  - 3.190"
  - 3.350"
  - 4"
  - 5"
- Overall Length
  - 1.970"
  - 2.160"
  - 2.560"
  - 2.760"
  - 2.950"
  - 2.980"
  - 3.200"
  - 3.350"
  - 3.660"
  - 4.250"
  - 4.270"
  - 5"
  - 6"
  - 6.020"
- Shank Size
  - .750"
  - 1"
  - 1.250"
  - 1.500"
- # of Flutes
  - 1
  - 2
  - 4
  - 5
- Coolant Thru
  - No
  - Yes

Cut Dia:0.5", EX/IN-RH/LH, Insert Screw:S14, Insert Size:14mm, Key:K14, Matl:Steel, Neck Dia:0.37", Neck Len:0.7", Overall Len:2.95", Shank Dia:0.75"

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

S200 D N60 MT8 $ 65.00 $ 70.00

#Flutes:4, Cut Dia:0.79"/20.0mm, EX/IN-RH/LH, Grade:MT8, Hold:H5.1,H5.2,H21,H20.1, Insert:S20, Matl:Carbide, Pitch Range-Ext:10.00-06.00 TPI, Pitch Range-Ext:2.50-4.50mm, Pitch Range-Int:3.00-5.00mm, Pitch Range-Int:8.00-5.00 TPI, Thread:Partial Profile 60°

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

H32 I 8 UN 027/400 MT7 $ 84.50 $ 91.00

Int-RH/LH, Grade:MT7, Style:Spiral Milling Insert w/o ChpBrkr, Matl:CARBIDE, 1 CutEdge, Pitch:8tpi, ThreadClass:UN (ANSI B1.1-1989):2A / 2B, Inch

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

C18 I 28 UN MT7 $ 66.86 $ 72.00

#Teeth:5, Cut Dia:0.7"/17.8mm, Grade:MT7, Holder Code:H5.1,H5.2,H6,H7,H8,H9,H20.1,H21,H22,H23, IN-RH/LH, Insert Type:C18, Matl:Carbide, Nominal Size:(3/4),(13/16),(7/8)", Pitch:28.00 TPI, Thread Form:UN

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 I 8 UN MT7 $ 56.57 $ 66.00

21mm (0.827") MILLING INSERT FOR UN (UNC,UNF,UNEF,UNS) INT-RH&LH THREAD, PITCH: 08.00 TPI, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 - 11.5 NPT MT7 $ 62.57 $ 73.00

21mm (0.827") MILLING INSERT FOR NPT INT&EXT-RH&LH THREAD, PITCH: 11.50 TPI, GRADE: MT7, ONE CUTTING EDGE

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SRC 1618 G $ 222.00

Cut Dia:12.0mm, Cut Len:40mm, EX/IN-RH/LH, Insert Screw:S16, Insert Type:C18,S20,S20, Key:K16, Matl:Steel, Neck Dia:12.0mm, Neck Len:40.0mm, Overall Len:90mm, Shank Dia:16.0mm, Shank Type:Round, Tool Code:H5.2

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SR 0620 K14C $ 477.29 $ 514.00

Cut Dia:0.62", EX/IN-RH/LH, Insert Screw:S14, Insert Size:14mm, Key:K14, Matl:Carbide, Neck Dia:0.5", Overall Len:7.0", Pilot Hole Dia:0.5"

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SG200 F W25 MT8 $ 65.00 $ 70.00

#Flutes:6, Cut Dep-Max:0.11"/2.9mm, Cut Dia:0.79"/20.0mm, Grade:MT8, Groove Dia-Min:0.79"/20.0mm, IN-RH/LH, Insert Type:S20, Matl:Carbide, Nose Flat Wid:0.098"/2.5mm, Rad:0.008"/0.2mm

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SC200 F H24 MT8 $ 60.36 $ 65.00

#Flutes:6, Cut Dep:0.093"/2.35mm, Cut Dia:0.79"/20.0mm, Grade:MT8, Holder Code:H5.1,H5.2,H6,H7,H8,H9,H20.1,H21,H22,H23, Included Ang:90°, IN-RH/LH, Insert Type:S20, Matl:Carbide, Nose Flat Wid:0.008"/0.2mm

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SC200 F H15 MT8 $ 60.36 $ 65.00

#Flutes:6, Cut Dep:0.059"/1.5mm, Cut Dia:0.79"/20.0mm, Grade:MT8, Holder Code:H5.1,H5.2,H6,H7,H8,H9,H20.1,H21,H22,H23, Included Ang:90°, IN-RH/LH, Insert Type:S20, Matl:Carbide, Nose Flat Wid:0.079"/2.0mm

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SC200 F A45 MT8 $ 60.36 $ 65.00

Grade:MT8, Matl:CARBIDE, Inch&Metric

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

SC 0375 D09 MT7 $ 90.00

#Flutes:4, Cut Dia:0.32", Cutter Len:0.95", EX/IN-RH/LH, Grade:MT7, Matl:Carbide, Overall Len:3.0", Shank Dia:(3/8)", Thread (BSPT):(1/8)-1, Thread (NPT):(1/8)-1, Thread (NPTF):(1/8)-1

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

H45 I 16 UN MT7 $ 94.71 $ 102.00

#Edges:1, Grade:MT7, IN-RH/LH, Insert Size:H45/45mm, Matl:Carbide, Pitch:16.00 TPI, Thread Form:UN, Thread Standard:1(15/16)-2(2/12),2(1/16)-2, Toolholder Code:SR 177 H45…,SRH45…

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

C18 F R0.1 MT7 $ 58.50 $ 63.00

#Flutes:4, Cut Dia:0.7"/17.8mm, EX/IN-RH/LH, Grade:MT7, Holder Code:H5.1,H5.2,H6,H7,H8,H9,H20.1,H21,H22,H23, Insert Type:C18, Matl:Carbide, Nose Flat Wid:0.2"/5mm, Rad:0.004"/0.1mm, Thread Form:Face Milling and Finishing

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

C18 C90 MT7 $ 46.43 $ 50.00

#Flutes:3, Cut Dep:0.077"/1.95mm, Cut Dia:0.7"/17.8mm, EX/IN-RH/LH, Grade:MT7, Holder Code:H5.1,H5.2,H6,H7,H8,H9,H20.1,H21,H22,H23, Included Ang:90°, Insert Type:C18, Matl:Carbide, Nose Flat Wid:0.043"/1.1mm, Rel Ang:90°

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

C12 I 2.0 ISO MT7 $ 53.86 $ 58.00

#Flutes:3, #Teeth:1, Cut Dia:0.49"/12.4mm, Grade:MT7, Holder Code:H3,H3.1,H4,H5,H18,H19,H20, IN-RH/LH, Insert Type:C12, Matl:Carbide, Pitch:02.00mm, Thread (M-Coarse):M16, Thread (M-Fine):M18,M20, Thread Form:ISO

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

C10 I 20 UN MT7 $ 52.93 $ 57.00

#Teeth:2, Cut Dia:0.39"/10.0mm, Grade:MT7, Holder Code:H1,H1.1,H2,H15,H16,H17, IN-RH/LH, Insert Type:C10, Matl:Carbide, Pitch:20.00 TPI, Thread (UN):(1/2), Thread Form:UN

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

40 I 2.0 ISO MT7 $ 126.86 $ 148.00

40mm (1.575") MILLING INSERT FOR ISO (METRIC) INT-RH&LH THREAD, PITCH: 02.00mm, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 I 1.5 ISO MT7 $ 56.57 $ 66.00

21mm (0.827") MILLING INSERT FOR ISO (METRIC) INT-RH&LH THREAD, PITCH: 01.50mm, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 I 12 UN MT7 $ 56.57 $ 66.00

21mm (0.827") MILLING INSERT FOR UN (UNC,UNF,UNEF,UNS) INT-RH&LH THREAD, PITCH: 12.00 TPI, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 E 16 UN MT7 $ 56.57 $ 66.00

21mm (0.827") MILLING INSERT FOR UN (UNC,UNF,UNEF,UNS) EXT-RH&LH THREAD, PITCH: 16.00 TPI, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

21 E 1.5 ISO MT7 $ 56.57 $ 66.00

21mm (0.827") MILLING INSERT FOR ISO (METRIC) EXT-RH&LH THREAD, PITCH: 01.50mm, GRADE: MT7,

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop

14 I 9 UN MT7 $ 40.29 $ 47.00

14mm (0.551") MILLING INSERT FOR UN (UNC,UNF,UNEF,UNS) INT-RH&LH THREAD, PITCH: 09.00 TPI, GRADE: MT7, CANNOT BE USED WITH CARBIDE HOLDERS, ONE CUTTING EDGE

Click Here To View Carmex's Metric Catalogs

Click Here To View Carmex's Inch Catalogs

+ Quick Shop