1/4" Diameter PH Series Stainless Stub (1.5XD-2XD): 1/2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc):
1/4" Diameter x 3/8" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Stainless
1/4" Diameter x 1/2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Stainless
| Axial DOC |
1/2" and Below |
| Radial DOC |
.025" |
| SFM |
300 |
| RPM |
4,584 |
| CLPT |
.003" |
| IPM |
68.7 |
| Metal Removal Rate |
0.85 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
