1/2" Diameter Tool Steel Long (6XD-8XD): 2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in Tool Steels like A2, H13, P20 & S7 (36 HRc and Below):
1/2" Diameter x 2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Steel
| Axial DOC |
2" and Below |
| Radial DOC |
.025" |
| SFM |
350 |
| RPM |
2,674 |
| CLPT |
.002" |
| IPM |
26.74 |
| Metal Removal Rate |
1.67 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
