1/2" Diameter 300 Series Stainless Long (6XD-8XD): 2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 303, 304 & 316 Stainless Steel (we based it off 316 so you can increase your SFM to 400 for 303):
Axial DOC | 1-5/8" and Below |
Radial DOC | .035" |
SFM | 350 |
RPM | 2,674 |
CLPT | .004" |
IPM | 53.5 |
Metal Removal Rate | 3.04 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
Subscribe to our newsletter and always be the first to hear about what is happening.