1/2" Diameter PH Series Stainless Long (6XD-8XD): 2" LOC and Below. Here are the recommended End Mills as well as Speeds and Feeds for the Optimized Tool Path (like a VoluMill, DynamicMill or iMachining) in 17-4PH and 15-5 PH (38-42 HRc) and Titanium (6AL4V):
1/2" Diameter x 2" Length of Cut x 5 Flute Alcrona Pro Coated Variable Pitch End Mill for Stainless
| Axial DOC |
2" and Below |
| Radial DOC |
.025" |
| SFM |
300 |
| RPM |
2,292 |
| CLPT |
.0025" |
| IPM |
28.65 |
| Metal Removal Rate |
1.79 |
*Do not use these Speeds/Feeds if you are not running an Optimized Tool Path
